RFspace NetSDR Manual de usuario descargar pdf (Pagina 24)

4.4.4 CW Startup Message

Purpose: Specifies CW power on startup message for NetSDR.

Control Item Code: 0x0150

Control Item Parameter Format:

Parameter 1 == 1 byte CW wpm( 10 to 30 wpm)

Parameter 2 == 1 byte CW Frequency in 100Hz steps(range is 4 to 19) or 400 to 1900Hz

Parameter 3 == 10 byte ascii message. Unused bytes set to 0. If first byte is 0 then reverts to default settings.

Only characters equal to 0x00 or (0x20 to 0x5F) or (0x61 to 7A) are valid.

Example set CW message to W1XYZ-2 at 600Hz and 23 wpm:

[10][00] [96][00] [17] [06] [57][31][58][59][5A][2D][32][00][00][00]

The Target responds with:

[10][00] [96][00] [17] [06] [57][31][58][59][5A][2D][32][00][00][00]

Rev. 1.03 2011-11-01

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Sin comentarios

RFspace NetSDR Manual de usuario Pagina 24